Stabilizer Product Profile
Product Description
Micro-Chek® 11 IPA Stabilizer is an EPA registered, low toxicity industrial mildewcide formulated for the protection of PVC, polyurethane and other polymer compositions susceptible to attack by microorganisms. Micro-Chek® 11 IPA is a 4 % solution of the active ingredient 2-n-octyl-4-isothiazolin-3-one dispersed in an isopropyl alcohol carrier, and contains no heavy metals.
Safety and Handling
As with chemicals in general, Micro-Chek® 11 IPA should be handled with care. It is a skin irritant and contact with skin and eyes should be avoided. Protective gloves and face shield or goggles are recommended. Wash thoroughly after handling and launder clothing before reuse. It is harmful if swallowed and should be kept out of reach of children.
Micro-Chek® 11 IPA is toxic to fish. Do not discharge directly to water and do not contaminate water by cleaning of equipment or waste disposal. Use only as directed on the label.
Typical Properties
| Active ingredient |
4% |
| Density(25°C) |
6.66 |
| Odor |
Alcohol |
| Flash Point (PMCC) |
11.7°C |
| Appearance |
Sparkling clear, light yellow liquid |
| Carrier |
Isopropyl alcohol |
| Net Drum Weight |
250 lbs. |
The information contained in this data sheet has been determined through the application of accepted engineering practice and is believed to be reliable. Since the conditions of application and use of our products are beyond our control, no warranty is expressed or implied regarding accuracy of this information, the results to be obtained from the use of the product, so that such use will not infringe on any patent. This information is furnished with the express condition that you will make your own tests to determine the suitability of the product for your particular use.
Polymer Additives Division
FERRO CORPORATION
7050 Krick Road - Walton Hills, Ohio 44146-4494
Phone (216) 641-8580 - Fax (216) 750-6729