Lubricant Product Profile
Product Description
Synpro® Zinc Stearate 8 Lubricant is a clear-melting Zinc Stearate with excellent initial color and heat stability for use in plastics applications in which minimal color development is required.
The product may be used in any Zinc Stearate application in which a powdered grade is not required and the low-dust characteristics of the flake make it desirable.
Synpro® Zinc Stearate 8 is suitable for use in food packaging applications in accordance with FDA Code of Federal Regulations, Section 178.2010 and other CFR Sections.
Safety and Handling
Complete toxicity and handling information can be found on the Material Safety Data Sheet, which is available on request.
Typical Properties
| % Ash |
13.5 |
| % Free Fatty Acid |
0.1 |
| % Moisture |
0.2 |
| Melting Point |
120°C |
The information contained in this data sheet has been determined through the application of accepted engineering practice and is believed to be reliable. Since the conditions of application and use of our products are beyond our control, no warranty is expressed or implied regarding accuracy of this information, the results to be obtained from the use of the product, so that such use will not infringe on any patent. This information is furnished with the express condition that you will make your own tests to determine the suitability of the product for your particular use.
Polymer Additives Division
FERRO CORPORATION
7050 Krick Road - Walton Hills, Ohio 44146-4494
Phone (216) 641-8580 - Fax (216) 750-6729