Lubricant Product Profile
Product Description
Synpro® ZINCLOID®, a specialty item for the rubber compounding industry, is an aqueous, paste type dispersion of zinc stearate. This convenient pre-dispersed system eliminates expensive dispersing equipment and dusty mixing operations used in rubber slab dipping procedures. ZINCLOID® is available in 55 gallon drums, directly transferable to troughs and slab dip tanks.
Safety and Handling
Complete toxicity and handling information can be found on the Material Safety Data Sheet, which is available upon request.
Typical Properties (Based on Solids)
| % Solids |
20 |
| % Ash |
13.5 |
| % Free Fatty Acid |
0.5 |
| Melting Point |
122°C |
| Fineness |
99% Passing 200 Mesh |
The information contained in this data sheet has been determined through the application of accepted engineering practice and is believed to be reliable. Since the conditions of application and use of our products are beyond our control, no warranty is expressed or implied regarding accuracy of this information, the results to be obtained from the use of the product, so that such use will not infringe on any patent. This information is furnished with the express condition that you will make your own tests to determine the suitability of the product for your particular use.
Polymer Additives Division
FERRO CORPORATION
7050 Krick Road - Walton Hills, Ohio 44146-4494
Phone (216) 641-8580 - Fax (216) 750-6729