Lubricant Product Profile
Product Description
Synpro® Zinc Stearate DLG-10A Lubricant is a uniformly fine powder. It is engineered to be a stir-in stearate for lacquer and sanding sealer applications. It incorporates without grinding and yields a minimum buildup in viscosity.
Synpro® Zinc Stearate DLG-10A provides superior sanding lubrication and excellent clarity for clear coatings. It is slightly basic for bloom resistance.
Safety and Handling
Complete toxicity and handling information can be found on the Material Safety Data Sheet, which is available upon request.
Typical Properties
| % Ash |
15.4 |
| % Water Soluble Salts |
< 0.1 |
| % Free Fatty Acids |
0.3 |
| % Moisture |
0.2 |
| Melting Point |
120°C |
| Apparent Density |
0.15 gm/cc |
| Fineness |
100% passing 325 mesh |
The information contained in this data sheet has been determined through the application of accepted engineering practice and is believed to be reliable. Since the conditions of application and use of our products are beyond our control, no warranty is expressed or implied regarding accuracy of this information, the results to be obtained from the use of the product, so that such use will not infringe on any patent. This information is furnished with the express condition that you will make your own tests to determine the suitability of the product for your particular use.
Polymer Additives Division
FERRO CORPORATION
7050 Krick Road - Walton Hills, Ohio 44146-4494
Phone (216) 641-8580 - Fax (216) 750-6729