Lubricant Product Profile
Product Description
Synpro® Calcium Stearate 114-36 Lubricant is used in a wide variety of plastics applications from rigid PVC to SMC. Its high bulk density lends itself to easier handling and lower dusting. It has proved to be one of the most uniform Calcium Stearates in the industry.
Synpro® Calcium Stearate 114-36 meets the Plastics Pipe Institute guidelines for interchangeability of Calcium Stearates in PVC pipe and fitting compounds as outlined in TR3. Part 0.
Synpro® Calcium Stearate 114-36 is suitable for use in food packaging applications in accordance with FDA Code of Federal Regulations; section 178.2010, and other CFR Sections.
Safety and Handling
Complete toxicity and handling information can be found on the Material Safety Data Sheet, which is available on request.
Typical Properties
| % Ash |
11.2 |
| % Free Fatty Acid |
0.2 |
| % Moisture |
2.9 |
| Melting Point |
155°C |
| Apparent Density |
0.3 gm/cc |
| Fineness |
99% passing 200 mesh |
The information contained in this data sheet has been determined through the application of accepted engineering practice and is believed to be reliable. Since the conditions of application and use of our products are beyond our control, no warranty is expressed or implied regarding accuracy of this information, the results to be obtained from the use of the product, so that such use will not infringe on any patent. This information is furnished with the express condition that you will make your own tests to determine the suitability of the product for your particular use.
Polymer Additives Division
FERRO CORPORATION
7050 Krick Road - Walton Hills, Ohio 44146-4494
Phone (216) 641-8580 - Fax (216) 750-6729