Stabilizer Product Profile
Product Description
Therm-Chek® 760X Stabilizer is a non-toxic past heat stabilizer, which conforms to CFR Title 21 Parts 178.2010, 181.27 and 182.1320. It is formulated for use in flexible PVC compounds and plastisols. It also is formulated to perform in plastisol, extrusion, calendering and injection molding applications in which FDA approval is necessary.
Therm-Chek® 760X has exceptional clarity in PVC compounds. When compared to other non-toxic heat stabilizer systems, Therm-Chek® 760X offers superior long-term stability. This stabilizer can be used for finished products that require low odor and the absence of free phenol.
In plastisols, this stabilizer provides good air release and viscosity control. Therm-Chek® 760X is suitable for both standard and low soap dispersion resins. It is compatible with epoxidized soybean oil.
Safety and Handling
Complete toxicity and handling information can be found on the Material Safety Data Sheet, which is available on request.
Typical Properties
| Particle Size (Hegman) |
4 min. |
| Appearance |
White paste |
The information contained in this data sheet has been determined through the application of accepted engineering practice and is believed to be reliable. Since the conditions of application and use of our products are beyond our control, no warranty is expressed or implied regarding accuracy of this information, the results to be obtained from the use of the product, so that such use will not infringe on any patent. This information is furnished with the express condition that you will make your own tests to determine the suitability of the product for your particular use.
Polymer Additives Division
FERRO CORPORATION
7050 Krick Road - Walton Hills, Ohio 44146-4494
Phone (216) 641-8580 - Fax (216) 750-6729