With these products it is possible to create diverse shades and surfaces. The range contains lustre, metallic, iron aventurine and special effect products.

For application of lustre, we propose screens between 77-90 threads/cm2 .

Metallic bases should be applied with 55-77 threads/cm2 .

Please note: To prevent pigment breakdown, metallic bases should not be processed in ball mills.
Lustres can also be colored by adding small quantities of our decoration colors. We recommend between 1-3%. Using higher quantities may reduce the lustre effect.

The fired surface of metallic effect products can be slightly rough when the layer is too thick or the underglaze is very matt. To prevent this, it is possible to add some flux. We suggest 5-10% of TF 10117.

Metallic screen printings

Code	Description	Temp. ºC
43830	bronze	1000-1040
47830	copper	1000-1040
44830	hematite	1000-1040
595/SE-2727	silver	1000-1040

  Metallic glazes

Code	Description	Temp. ºC
554/7A1	silver	1200
564/7A5	gold	1200
330/BE-422	bronze glossy	1000-1100
330/BE-420	gold glossy	1000-1100
TF 39031	silver glossy	1000-1040
TF 39033	silver matt	1000-1040
TF 39030	silver matt	1000-1040

Matting agent

Matting agents are used to increase the degree of mattness of other products. Our matting agent is compatible with most of our bases. The amount added depends on the base and varies from case to case.
We suggest beginning tests adding between 5-10%.

Code	Description	Lead	CoE.
TF 69440F	matting agent	*	65

For further information or to receive a copy of the catalogue, contact us