25 Series Two-Pack System

Ferro offers a two-component system of environmentally friendly waterborne coatings formulated for spray application used in high-speed glass bottle decoration and bottle filling lines.

Two-component system of environmentally friendly waterborne coatings

THANK YOU FOR YOUR INQUIRY. OUR TEAM WILL BE CONTACTING YOU SHORTLY.

Product Inquiry

  25 Series Product Inquiry

The 25 Series is a heavy-metal free two-component system of waterborne coatings for spray application on glass that contains low VOCs. These coatings exhibit good glass adhesion while providing good mechanical and chemical resistance.

Ferro’s waterborne coatings offer higher performance than ceramic inks and cure at a much lower temperature than glass enamels. Available in a wide range of colors, our coatings provide decorators with the ability to produce an almost infinite number of colors, allowing the creation of innovative designs on various glass container applications. 

Additionally, color concentrates can be mixed with base coats to provide further options for on-site color mixing and matching. Once the coating is ready to apply, it has a pot life of about 4 hours. 
Note: Curing at 200ºC - 210ºC is essential to achieve the desired adhesion and scuff resistance.

The 25 Series is available worldwide, except in North America.
25 SERIES TWO-PACK SYSTEM

25 SERIES APPLICATIONS 

Ferro’s waterborne coatings are primarily used for the decoration of glass bottles and containers including: 

  • Luxury glass bottles  
  • Glass fragrance containers
  • Glass cosmetic containers
  • Glass vitamin containers
  • Glass candle votives
  • Glass lighting fixtures


  

25 SERIES PROPERTIES AND FEATURES

Technical Features:

Product Description Solids (%) V.O.C. (%) Flash Point Density (g/ cm3) Viscosity (Clear or Colors) Adhesion Promoter Reference Thinner
25-0018
Gloss coating 32 - 36 22 -24 > 60°C 1.03 ± 0.03 50-60 seconds #4 Ford 20°C 25-0002 Deionized water
25-0079 Gloss coating 40 - 44 22 - 24 > 60°C 1.05 ± 0.03 50-60 seconds #4 Ford 20°C 25-0002 Deionized water
25-0057
Matt coating 37 - 39 15 - 17 > 60°C 1.06 ± 0.03 50-60 seconds #4 Ford 20°C 25-0002 Deionized water
25-0028 Base coat for metallic colors 11 - 13 11 - 13 > 60°C 1.00 ± 0.02 50-60 seconds #4 Ford 20°C 25-0002 Deionized water

 

General Performance Characteristics:

Product Description MEK/Acetone Double Rubs 24-hr Soak In Water 24-hr Soak G1 24-hr Soak Ethanol Scuff Resistance (0 = bad, 5 = very good) +1,5 % 25-0055, scuff +1 Scratch Test (Internal Elcometer Test) After 150 Cycles. Visual Evaluation: 0 = bad, 5 = very good Taber Test, 100 Cycles. Visual Evaluation: 0 = bad, 5 = very good Dishwasher Resistance (according to EN 12875 part 1)
25-0018
Gloss coating Min 100 double rubs Pass Pass Pass 2 - 3 2 with 25-0055 / 3 1 - 2 125 - 375 depending on color and cure conditions
25-0079 Gloss coating Min 100 double rubs Pass Pass Pass
4 3 with 25-0055 / 4 - 5 3 125 - 375 depending on color and cure conditions
25-0057
Matt coating Min 100 double rubs Pass Pass Pass Polishing resistance: GOOD - - 125 - 375 depending on color and cure conditions
25-0028 Base coat for metallic colors Pass with topcoat Pass with topcoat Pass with topcoat Pass with topcoat Not applicable, always needs a topcoat - -  


*Note:
Performance characteristics are based on testing conducted in Ferro development laboratories. Data is given   for general comparison only; it is not a guarantee of performance in a particular application. It is always   recommended that the customer evaluate the coating for suitability in the intended application. We strongly   recommend that all safety precautions be followed as per the relevant Ferro MSDS.


FERRO 25 SERIES WATERBORNE COATINGS PRODUCT INFORMATION

25 Series Waterborne Coatings Product Data 



Waterborne coatings product testings

VALUE ADDED SERVICES


Color Mixing    
We offer a standard mixing palette of colors, which gives our customers the flexibility of tailoring mixings and color matches on-site.

Our basic mixing capabilities include providing high-gloss clears, opaque, metallic, pearlescent and matte colors to colored imitation acid etches.  These coating mixes can be applied singly or in combination as an all-over even finish or to deliver diffused flow-out effects. 
 

Color Matching
Ferro provides complete custom color matching services to help our customers develop new color shades and coatings according to specific requirements, including production methods and desired finishes.

Precise color matching can be achieved using our internal extensive database and color matching expertise.   All colors are matched to defined reference samples, to ensure exact and consistent color reproduction from batch to batch. We also work with common color card systems and formula guides like Pantone©, RAL and HKS.